Cat5e/6 Shielded Surface-Mount Junction Box against EMI/RFI line noise.Shielded ethernet Cat 6 junction box is Krone Punch Down Type.Direct connection without couplers or connectors.Phosphor bronze with gold plated on plug contact area and fire-retardant housing.Wire Gage: 23 To 26 AWG.TIA/EIA 568A and 568B wiring pattern. Product Description Iwillink Shielded Ethernet Junction Box The shielded junction box is for splicing two Ethernet Cat 5e or Cat 6 cables together without the use of connectors and couplers. If you're going to joint 2 wires together permanently, it's best to have as direct a connection as possible. The punch down connection provides secure continuity. The wiring junction box is Krone type. The wire gage is 23-26 AWG and is 568A/568B color coded. Rugged & Durable Construction ABS plastic with safety ratingIDC modules fit Krone impact toolsMounting screws2 x Cable tiesDouble-stick tape2 x Copper foil tape Iwillink Junction Box Installation Guid Step 1 Cut the cable jacket; Remove the cable jacke; Separate the wirs; Arrange the wire; Attach copper foil tape for EMI shielding. Step 2 Push the wires into the IDC according to T568A/T568B colorcod; Impact and fix the wires by Krone/LSA impact tool, cut off the excess wires. Step 3 Install the cable on the other side, check the wires. Step 4 Use the cable ties for easy cable managemen; Close the cover, tighten the screw of junction box. Compatibility Cat6/Cat5e Cat6/Cat5e Cat6/Cat5e Cat6/Cat5e Cat6/Cat5e Material Gold-plated contacts Gold-plated contacts Gold-plated contacts Gold-plated contacts Plastic Plastic Package Content 10 Packs 10 Packs 5 Packs 1 Pack 1 Pack 5 Packs
